当前状态 > 产品展示 > 视频测试设备

RF录制仪

概述
该仪器能录制带宽为8MHz的射频信号,将频率范围从30MHz至1002MHz的现场射频信号存储在固态存储器中,并可将录制的信号进行重现分析。
增加选件后,可将带宽扩展至24MHz和40MHz
仪器提供DC+12V的电源输出接口,便于车载直流电源等的输入
仪器可以录制现场各类型的射频信号,在工厂或实验室回放,测试各接收器在真实环境下的性能指标。
详细
紧凑结构
将录制.回放功能集于一身,小巧轻便。
宽广的频率范围
频率范围从30MHz至1002MHz,适用于录制和播放所有地面广播信号
标准配置固态存储器存储数据
使用高度可靠的固态存储器存储记录的数据
DC +12V电源输入
提供DC +12V电源输入接口,便于如电池等其他直流电源的输入。
eSATA 接口和USB 2.0接口
通过标配安装的eSATA 接口和USB 2.0接口,可以高速地备份录制的数据。
低噪声放大器
在输入端口装有高性能低噪声放大器
友好的用户界面
使用7英寸触摸式液晶屏,用户使用时得心应手。
遥控操作

General
Feature
• Compact size and all-in-one model.
• The frequency range covers 42 MHz to 1006 MHz of the recording frequency.
• 8 MHz bandwidth RF signal can be recorded/reproduced.
In addition, when using the option, 24MHz bandwidth and 40MHz bandwidth RF signal can be
factories or laboratories, it is possible to test receivers under the reception environment of the data.
recorded/reproduced.
• 7-inch wide type VGA touch panel is equipped.
• When using the spectrum display function , the spectrum at the recording can be confirmed.
• The solid-state-drive (SSD) for the data recorder is equipped as the standard.
(Data of 90 minutes can be recorded/reproduced at 8 MHz bandwidth signal captured.)
• Data can be backed up at high speed through eSATA port and USB2.0 port.
• The Low Noise Amplifier is equipped to the RF input side.(NF=2dB typ. At -80 dB signal input)
• Auto Cal function that sets the level of the recorded signal automatically at the RF signal
capturing is equipped.
• Remote control is possible.
• Time recording function and repeat reproduction function are equipped.
• The frequency and level at the recording can set automatically at the reproduction .
• Data in ATSCA-74 standard can be reproduced.
Configuration
Dimensions W:360 x H:175 x D:300 (mm)
Weight Less than 10 kg
Power Source 1. AC90V to AC240V (50Hz/60Hz)
2. DC+12V
Option
Model Number Contents of Option
4416U-W01 8MHz and 24MHz can be selected.
4416U-W02 8MHz and 24MHz and 40MHz can be selected.
4416U-C01 Cloth bag for hand-carry
4416U-H01 External SSD (250Gbyte)
* This device is manufactured for analysis of high frequency signals, quality tests for receivers and so on.

< 返回首页
销售客服1 客服